
Galvanized mesh question
- nelloyello11
- Weaning
- Posts: 1901
- Joined: Sun Feb 13, 2011 11:50 pm
- Location: Buffalo, NY
Re: Galvanized mesh question
Perhaps I am just too fussy! But I want the best for my birdy babies! 

Nelissa

1 NG (Peter), 2 SF/FF (Astrid & Nina) and 2 BC (Desmond & Penelope) Zebra finches
2 Owl Finches (Hedwig & Fawkes)
Painted turtle (Keeker)
1 NG (Peter), 2 SF/FF (Astrid & Nina) and 2 BC (Desmond & Penelope) Zebra finches
2 Owl Finches (Hedwig & Fawkes)
Painted turtle (Keeker)
- cindy
- Bird Brain
- Posts: 18754
- Joined: Wed Jul 22, 2009 8:33 pm
- Location: west central Florida
Re: Galvanized mesh question
Have you checked with your local feed stores? they might be able to order a smaller roll for you...that would save on shipping. You have quiet a few feed stores in your area.
Zebra, Gouldians, Java, CBM Shaft tail & Grasskeets
~ My Facebook groups ~
*Finchaholics ~ finches, hookbills, softbills & canaries are welcome here!
discussions regarding species, housing, breeding, preventatives, treatments
*Birdaholics ~ Avian Classified Ads Only
- nelloyello11
- Weaning
- Posts: 1901
- Joined: Sun Feb 13, 2011 11:50 pm
- Location: Buffalo, NY
Re: Galvanized mesh question
I have checked out some of them. They all carry uncoated mesh... The green mesh I found on amazon has free shipping so I think I am going to go with that. Thank you so much for all your suggestions!cindy wrote:Have you checked with your local feed stores? they might be able to order a smaller roll for you...that would save on shipping. You have quiet a few feed stores in your area.
Oooh I so wish I could have this done NOW! I am so ezcited to get them in their new home!

Nelissa

1 NG (Peter), 2 SF/FF (Astrid & Nina) and 2 BC (Desmond & Penelope) Zebra finches
2 Owl Finches (Hedwig & Fawkes)
Painted turtle (Keeker)
1 NG (Peter), 2 SF/FF (Astrid & Nina) and 2 BC (Desmond & Penelope) Zebra finches
2 Owl Finches (Hedwig & Fawkes)
Painted turtle (Keeker)
- cindy
- Bird Brain
- Posts: 18754
- Joined: Wed Jul 22, 2009 8:33 pm
- Location: west central Florida
Re: Galvanized mesh question
I like the coated wire, the green should be nice, kind of natural.
Zebra, Gouldians, Java, CBM Shaft tail & Grasskeets
~ My Facebook groups ~
*Finchaholics ~ finches, hookbills, softbills & canaries are welcome here!
discussions regarding species, housing, breeding, preventatives, treatments
*Birdaholics ~ Avian Classified Ads Only
- nelloyello11
- Weaning
- Posts: 1901
- Joined: Sun Feb 13, 2011 11:50 pm
- Location: Buffalo, NY
Re: Galvanized mesh question
I was kind of thinking that too, since I am doing natural wood!cindy wrote:I like the coated wire, the green should be nice, kind of natural.
Nelissa

1 NG (Peter), 2 SF/FF (Astrid & Nina) and 2 BC (Desmond & Penelope) Zebra finches
2 Owl Finches (Hedwig & Fawkes)
Painted turtle (Keeker)
1 NG (Peter), 2 SF/FF (Astrid & Nina) and 2 BC (Desmond & Penelope) Zebra finches
2 Owl Finches (Hedwig & Fawkes)
Painted turtle (Keeker)
- cindy
- Bird Brain
- Posts: 18754
- Joined: Wed Jul 22, 2009 8:33 pm
- Location: west central Florida
Re: Galvanized mesh question
Your finches will love it!
Zebra, Gouldians, Java, CBM Shaft tail & Grasskeets
~ My Facebook groups ~
*Finchaholics ~ finches, hookbills, softbills & canaries are welcome here!
discussions regarding species, housing, breeding, preventatives, treatments
*Birdaholics ~ Avian Classified Ads Only
- kenny
- Weaning
- Posts: 1778
- Joined: Sat Jul 15, 2006 3:45 pm
- Location: East Yorkshire,England
Re: Galvanized mesh question
hi
when i first started in the 70s i had a much smaller aviary and i used the plastic coated wire but i could only get green but it was ok for watching the birds through,but when i built my new one it was 19x9x6ft6 and i had to do the back and front and the roof which would have cost me a small fortune for that kind of wire so i just went for the galvanised wire i must admit the plastic coated looked better and it is more durable and just required a rub down occaisonally but it was beyond my means! i just thought i would show you this as i have just found it,it shows the front of my aviary and my westie eddie who we always called (the love sponge)keeping a close eye on my quail
ken
when i first started in the 70s i had a much smaller aviary and i used the plastic coated wire but i could only get green but it was ok for watching the birds through,but when i built my new one it was 19x9x6ft6 and i had to do the back and front and the roof which would have cost me a small fortune for that kind of wire so i just went for the galvanised wire i must admit the plastic coated looked better and it is more durable and just required a rub down occaisonally but it was beyond my means! i just thought i would show you this as i have just found it,it shows the front of my aviary and my westie eddie who we always called (the love sponge)keeping a close eye on my quail
ken
you can always tell a yorkshireman,but you cant tell him much
- nelloyello11
- Weaning
- Posts: 1901
- Joined: Sun Feb 13, 2011 11:50 pm
- Location: Buffalo, NY
Re: Galvanized mesh question
Thanks kenny! I wish I had space for an outdoor space like that!kenny wrote:hi
when i first started in the 70s i had a much smaller aviary and i used the plastic coated wire but i could only get green but it was ok for watching the birds through,but when i built my new one it was 19x9x6ft6 and i had to do the back and front and the roof which would have cost me a small fortune for that kind of wire so i just went for the galvanised wire i must admit the plastic coated looked better and it is more durable and just required a rub down occaisonally but it was beyond my means! i just thought i would show you this as i have just found it,it shows the front of my aviary and my westie eddie who we always called (the love sponge)keeping a close eye on my quail
ken
Nelissa

1 NG (Peter), 2 SF/FF (Astrid & Nina) and 2 BC (Desmond & Penelope) Zebra finches
2 Owl Finches (Hedwig & Fawkes)
Painted turtle (Keeker)
1 NG (Peter), 2 SF/FF (Astrid & Nina) and 2 BC (Desmond & Penelope) Zebra finches
2 Owl Finches (Hedwig & Fawkes)
Painted turtle (Keeker)
- cindy
- Bird Brain
- Posts: 18754
- Joined: Wed Jul 22, 2009 8:33 pm
- Location: west central Florida
Re: Galvanized mesh question
Wow Kenny, that would be so nice to sit and watch them while having coffee/tea first thing in the morning!!! Very nice!
Zebra, Gouldians, Java, CBM Shaft tail & Grasskeets
~ My Facebook groups ~
*Finchaholics ~ finches, hookbills, softbills & canaries are welcome here!
discussions regarding species, housing, breeding, preventatives, treatments
*Birdaholics ~ Avian Classified Ads Only
- kenny
- Weaning
- Posts: 1778
- Joined: Sat Jul 15, 2006 3:45 pm
- Location: East Yorkshire,England
Re: Galvanized mesh question
hi cindy
my relaxing bench was opposite the aviary so i got a full view of all the goings on get a nice cold drink and sit at the table and watch eddie running up and down following the quail he couldnt get near them because i installed a kickboard that was as tall as the quail on the inside i think he thought they where toys.....i wish i had a £10 note for every hour i spent sat there!
ken
my relaxing bench was opposite the aviary so i got a full view of all the goings on get a nice cold drink and sit at the table and watch eddie running up and down following the quail he couldnt get near them because i installed a kickboard that was as tall as the quail on the inside i think he thought they where toys.....i wish i had a £10 note for every hour i spent sat there!
ken
you can always tell a yorkshireman,but you cant tell him much
- jecagesandbirds
- Nestling
- Posts: 81
- Joined: Thu Jul 14, 2011 6:42 pm
- Location: Miami, FL
Re: Galvanized mesh question
I breed my on this http://finchforum.com/viewtopic.php?f=2&t=14765
after you finish give a spray of baking soda+SALT mixed on water, if by any chance rains let it have a bath and you are done
this rack has 3 cages with 3 holes each all handmade by me
after you finish give a spray of baking soda+SALT mixed on water, if by any chance rains let it have a bath and you are done
this rack has 3 cages with 3 holes each all handmade by me
JE Aviario
Email: jeaviario@gmail.com
Email: jeaviario@gmail.com
-
- Pip
- Posts: 2
- Joined: Mon Oct 31, 2011 1:35 pm
Re: Galvanized mesh question
Another couple of sources I have used in searching for this galvanized mesh material to be used outdoor space:
Mcmaster Carr - Industrial Supply Warehouse - online, great service and price is decent.
http://www.bwire.com/
Belleville Wire Cloth - Called, good service over the phone and very competitive pricing.
Some FYI's for yall out there.
Mcmaster Carr - Industrial Supply Warehouse - online, great service and price is decent.
http://www.bwire.com/
Belleville Wire Cloth - Called, good service over the phone and very competitive pricing.
Some FYI's for yall out there.