My indoor aviary project
Posted: Fri May 17, 2013 12:19 pm
Hi everybody! I'm new to FINCHforum and so I'm excited to learn more from the pros.
SMALL INDOOR AVIARY PROJECT
I wanted to share some results from my first indoor aviary project. The project took several days to complete and it was a lot of work, but the results are fantastic (or at least I think so). I think anyone could do this and you don't need a lot of tools.
I acquired a gaggle of Gouldian finches and, so they needed some more space to fly around. I wanted something a little more aesthetic in which to house my birds, while keeping in mind their needs for space, access to food and water, nesting sites, and good sanitation. I also wanted a cage-free view of these little beauties! So here is my first prototype and how I did it. Hopefully someone will find this useful and possibly inspiring.
I started with an old china cabinet that I picked up from a used furniture dealer. It was in pretty sad shape, and so I had to sterilize this thing before I would think about touching it. Here are some of the steps I used to build it:
1. I first removed all the glass and wire from the cabinet. I saved the rubber strips that held the glass in place.
2. I took apart everything. I took off the back of the china cabinet and removed the doors. I also dismantled the top pieces using a power drill.
3. I had to use a hacksaw to remove the boards that held the glass shelving in the cabinet; they were inserted with tongue and groove, and so they wouldn't come out easily. I didn't throw away anything because I thought I could use it to build other components.
4. I filled the holes with wood filler and sanded them smooth. I also filled some other holes where mites or other insects might hide.
5. I installed the decorative piece that was on the top-front and moved it to face the back. This would be the "new front" of the indoor aviary, and I made measurements for what would become the plexiglass front. I left space at the bottom so I could build a drop-down door and a pull-out drawer to catch the mess. Because I wanted the aviary to have a finished look, I also measured the back so I could add a new piece (and trim) to the top of the back; this hides the ugly back of the arched decorative front piece. See the photos and this may make more sense.
4. Next, I headed off to home depot and bought the following items: (a) wood for a new top piece on the back of the cabinet, and another for the pull-down front that hides the drawer; (b) wood molding to hold the plexiglass on the front of the cabinet; (3) finishing molding to finish the back of the cabinet so that it better matched the new front; (4) hinges for the drop-down front, and new brushed nickel hardware; (5) a non-toxic, brightly colored paint and an accent color (white) to make my aviary more "fun and interesting"; and (5) a few vinyl "sticky" tiles for the bottom of the aviary. The great thing about stores like Home Depot is that they will cut your wood for you for free. Other than the miter-saw I picked up especially for this project on Craigslist ($60), I don't really own power tools!
Lastly, I ordered a piece of plexiglass from a local glass dealer that they cut to the correct size.
5. I got to work painting the cabinet pieces and installed and painted the new wood pieces. I also built the bottom tray, using the leftover wood from the shelf pieces that I cut out of the china cabinet. It was perfect because they had a small groove that held glass. I took advantage of this, and used these grooves to hold some corrugated poly sheeting that would form the drawer bottom. Now I had something to catch the poo! Cleaning the aviary regularly is an easier task with a pull-out drawer. I also built a small frame with some square wooden dowels on which a caged bottom could rest (just above the drawer).
6. Once everything was painted and dried, I cut apart some old flight cage pieces to position in the back and sides of the aviary. I lucked out here because the people from whom I acquired the birds had previously cut apart a 3-4 flight cages to build a large 4x4x2 flight cage (which I also have and need to assemble); there were a bunch of cage fronts and a few cage sides left over from that project that they gave me. I like the idea of using a caged back; it will ensure good air circulation and access points to place food, nest boxes, and perches for the birds. Another cool feature is that I re-installed the former doors of the china cabinet (on their original hinges) and so I can open two of these for major cleaning jobs on the inside of the aviary--for example, this comes in handy when I need to catch the birds or clean the plexiglass front.
I marked the cage pieces to the correct size, anticipated placement of doors, and used some heavy-duty wire nippers to cut the cage into pieces. The cabinet was tall and so I had to use several pieces to form the backs and sides. I was also careful to avoid any sharp edges that could injure the finches.
7. I installed the sticky tiles in the bottom of the aviary. I thought this would help the drawer slide in and out more smoothly. It also comes in handy...spooked finches are known to poo (I think that may be where the phrase "scared the crap out of me" comes from!) and vinyl is easy to clean. When the drawer is removed for cleaning, the finches may poo and I can easily wipe down the bottom before I replace the drawer.
8. Next I installed the plexiglass front. I had to make some narrow wood pieces that will hold the plexiglass at the correct height (i.e., to allow the drawer to slide under); I used some square wooden dowel for this. Next, I cut the molding to frame the plexiglass and hold it in place (the top of the plexi rests behind the decorative front piece, but additional molding was needed to frame it and hold the sides). Of course, I painted the molding on both sides before I installed it.
9. Now we were looking like an aviary! I installed the hinges for the drop-down bottom front (that hides the drawer)...popped the drawer inside...and installed the cage bottom to keep the birds out of their own mess.
10. Lastly, I wanted some additional lighting inside the cabinet. I picked up some LED strip lighting. This is expensive (ca. $69) but the perfect solution because it's perfectly flat. Not only can you cut the stuff to the exact size, you can link the pieces up in series. It even comes with a dimmer switch, so you can gradually put your finches into a bright or dark situation gradually. The lights are also energy efficient and don't produce heat! So no burnt birdies!
Voila! An indoor aviary is born (see pics below). I let the birds tell me how it works. I ended moving around a few perches and decided where best to place food dishes, etc.--i.e., to minimize soiling by the birds and maximize space for flying. So far so good. The only thing I needed to add (and I had something already) was a little plexiglass shelter for the birds' water. If I put a water dish on the side of the aviary, they splashed all over the front plexi. So, I moved the water to the cage floor and the shelter shields the water and eggshells from soiling; it also doesn't obstruct my view!
So what do you think? I love working in this (otherwise unused) room. The birds sing and makes me happy!
SMALL INDOOR AVIARY PROJECT
I wanted to share some results from my first indoor aviary project. The project took several days to complete and it was a lot of work, but the results are fantastic (or at least I think so). I think anyone could do this and you don't need a lot of tools.
I acquired a gaggle of Gouldian finches and, so they needed some more space to fly around. I wanted something a little more aesthetic in which to house my birds, while keeping in mind their needs for space, access to food and water, nesting sites, and good sanitation. I also wanted a cage-free view of these little beauties! So here is my first prototype and how I did it. Hopefully someone will find this useful and possibly inspiring.
I started with an old china cabinet that I picked up from a used furniture dealer. It was in pretty sad shape, and so I had to sterilize this thing before I would think about touching it. Here are some of the steps I used to build it:
1. I first removed all the glass and wire from the cabinet. I saved the rubber strips that held the glass in place.
2. I took apart everything. I took off the back of the china cabinet and removed the doors. I also dismantled the top pieces using a power drill.
3. I had to use a hacksaw to remove the boards that held the glass shelving in the cabinet; they were inserted with tongue and groove, and so they wouldn't come out easily. I didn't throw away anything because I thought I could use it to build other components.
4. I filled the holes with wood filler and sanded them smooth. I also filled some other holes where mites or other insects might hide.
5. I installed the decorative piece that was on the top-front and moved it to face the back. This would be the "new front" of the indoor aviary, and I made measurements for what would become the plexiglass front. I left space at the bottom so I could build a drop-down door and a pull-out drawer to catch the mess. Because I wanted the aviary to have a finished look, I also measured the back so I could add a new piece (and trim) to the top of the back; this hides the ugly back of the arched decorative front piece. See the photos and this may make more sense.
4. Next, I headed off to home depot and bought the following items: (a) wood for a new top piece on the back of the cabinet, and another for the pull-down front that hides the drawer; (b) wood molding to hold the plexiglass on the front of the cabinet; (3) finishing molding to finish the back of the cabinet so that it better matched the new front; (4) hinges for the drop-down front, and new brushed nickel hardware; (5) a non-toxic, brightly colored paint and an accent color (white) to make my aviary more "fun and interesting"; and (5) a few vinyl "sticky" tiles for the bottom of the aviary. The great thing about stores like Home Depot is that they will cut your wood for you for free. Other than the miter-saw I picked up especially for this project on Craigslist ($60), I don't really own power tools!
Lastly, I ordered a piece of plexiglass from a local glass dealer that they cut to the correct size.
5. I got to work painting the cabinet pieces and installed and painted the new wood pieces. I also built the bottom tray, using the leftover wood from the shelf pieces that I cut out of the china cabinet. It was perfect because they had a small groove that held glass. I took advantage of this, and used these grooves to hold some corrugated poly sheeting that would form the drawer bottom. Now I had something to catch the poo! Cleaning the aviary regularly is an easier task with a pull-out drawer. I also built a small frame with some square wooden dowels on which a caged bottom could rest (just above the drawer).
6. Once everything was painted and dried, I cut apart some old flight cage pieces to position in the back and sides of the aviary. I lucked out here because the people from whom I acquired the birds had previously cut apart a 3-4 flight cages to build a large 4x4x2 flight cage (which I also have and need to assemble); there were a bunch of cage fronts and a few cage sides left over from that project that they gave me. I like the idea of using a caged back; it will ensure good air circulation and access points to place food, nest boxes, and perches for the birds. Another cool feature is that I re-installed the former doors of the china cabinet (on their original hinges) and so I can open two of these for major cleaning jobs on the inside of the aviary--for example, this comes in handy when I need to catch the birds or clean the plexiglass front.
I marked the cage pieces to the correct size, anticipated placement of doors, and used some heavy-duty wire nippers to cut the cage into pieces. The cabinet was tall and so I had to use several pieces to form the backs and sides. I was also careful to avoid any sharp edges that could injure the finches.
7. I installed the sticky tiles in the bottom of the aviary. I thought this would help the drawer slide in and out more smoothly. It also comes in handy...spooked finches are known to poo (I think that may be where the phrase "scared the crap out of me" comes from!) and vinyl is easy to clean. When the drawer is removed for cleaning, the finches may poo and I can easily wipe down the bottom before I replace the drawer.
8. Next I installed the plexiglass front. I had to make some narrow wood pieces that will hold the plexiglass at the correct height (i.e., to allow the drawer to slide under); I used some square wooden dowel for this. Next, I cut the molding to frame the plexiglass and hold it in place (the top of the plexi rests behind the decorative front piece, but additional molding was needed to frame it and hold the sides). Of course, I painted the molding on both sides before I installed it.
9. Now we were looking like an aviary! I installed the hinges for the drop-down bottom front (that hides the drawer)...popped the drawer inside...and installed the cage bottom to keep the birds out of their own mess.
10. Lastly, I wanted some additional lighting inside the cabinet. I picked up some LED strip lighting. This is expensive (ca. $69) but the perfect solution because it's perfectly flat. Not only can you cut the stuff to the exact size, you can link the pieces up in series. It even comes with a dimmer switch, so you can gradually put your finches into a bright or dark situation gradually. The lights are also energy efficient and don't produce heat! So no burnt birdies!
Voila! An indoor aviary is born (see pics below). I let the birds tell me how it works. I ended moving around a few perches and decided where best to place food dishes, etc.--i.e., to minimize soiling by the birds and maximize space for flying. So far so good. The only thing I needed to add (and I had something already) was a little plexiglass shelter for the birds' water. If I put a water dish on the side of the aviary, they splashed all over the front plexi. So, I moved the water to the cage floor and the shelter shields the water and eggshells from soiling; it also doesn't obstruct my view!
So what do you think? I love working in this (otherwise unused) room. The birds sing and makes me happy!
. Welcome to the forum!!! It's a blast...
You are very talented. It's just so beautiful 